CREATING POSTSCRIPT FILES

FROM QUARKXPRESS 4.0 FOR MACINTOSH

Step 1

  1. On the Document tab, Select Include Blank Pages.
  2. Set the Registration to Centred.
  3. Bleed amount should be 3/16".
  4. Offset should be a minimum of 24 pt.

    5. 1

Step 2

  1. On the Setup tab, for Printer Description select Prinergy
    Refiner* or Acrobat Distiller.
  2. The Paper Width should be 1" wider than the width of your document.

    3. 1

Step 3

  1. On the Output tab, set Print Colours to Composite CMYK.
  2. Set the resolution to 2400 DPI.
  3. Set the frequency to 120 LPI.
  4. Set Halftoning to Conventional.

    5. 1

Step 4

  1. Select Options Tab.
  2. For Pictures, set Output to Normal.
  3. Set Data to Binary.
  4. Set OPI to include images.
  5. Select Full Resolution TIFF Output.

    6. 1

Step 5

  1. Click on the Page Setup button at the bottom left. This will bring up the
    LaserWriter Page Setup.
  2. Click on Options to bring up this window.
  3. Turn all of the options Off.
  4. Click OK.

Step 6

  1. Click on the Printer button at the bottom left. This will bring up the menu
    that will allow you to change the destination from Printer to File .
  2. Set Destination to File.
  3. The Format should be PostScript Job, ASCII and Level 2 and 3 Compatible.
  4. Set Font Inclusion to All.
  5. When you click Save it will prompt you for a file name and location to save the
    file.

    6. *NOTE: The Prinergy Refiner PPD is available from our website at www.webcomlink.com.